I just replaced the vanity top in my bathroom and now the faucet hose on one side is too short to connect to the water supply. Also keep in mind that the way faucets are made today its relatively uncommon to end up with faucet lines that are significantly too short.
Faucet Lines Are Too Short Doityourself Com Community Forums
The flex line allows the water pipe to connect to the faucet without struggling to get everything lined up perfectly.
Faucet supply line too short. I got on the internet located and ordered your product installed them the day I got them they worked great and I never looked back. I have to agree theres been hundreds of post about the plumbing and electrical issues coming from Ikea. Too thick forfaucet connections to work with supply lines.
Simply screw the. Did you install the top then try and install the faucet. I dont want to replumb the supply.
It will have 38 male threads on one end the same as the stop valve which will connect to the factory hose and 38 female threads on the other to connect to the stop valve. The fitting HJ mentioned is just a chunk of brass with a male 38 fitting at each end. Regardless of what your supply line is made of it probably uses a coupling nut to secure it to the faucet tailpiece.
Faucets are typically made with supply lines that are long enough to match up with most existing plumbing so if your lines are very far apart you may already have more plumbing problems than youre aware of. As you can see in the above picture the lines were just a little too short but that wasnt the real problem. I talked to a professional plumber he said they grind the sink down to gain the extra length they need your product saved a lot of trouble.
So Im looking for a short one or two foot 38 supply line extension female connector on one end male on the other end. However theres that word again I hit a snag when I went to connect the new faucet to the water supply line. I purchased a faucet that has integral supply lines attached to it.
Find one that matches the tread but too long then just make a simple loop with the flex line. We have not been able find longer supply lines w the small end that can fit the faucet. The line is too short to reach my supply 38 comp.
This way you can see what your doing and find any problums. I always install the faucets and supply lines to the top then set the top in place. I was wondering if there is some form of extender supply that I could use.
Faucet Water Supply Line Too Short. Just bought a new faucet for the kitchen and the supply lines that are part of the faucet are just a bit too short to reach the 38 shut off valves. The HD associate suggested that we add these 12 supply lines as an extension.
Delta Faucet Company recommends you leave the existing fitting on the PEX supply tubing and not shorten the tubing. Depending on the accessories that go with your faucet you may see other water supply line types under the sink. The hot supply is fine but the cold is about 12 too short.
In the image you can see this connector has a 12 FIP for the supply while the other end which i dont know the name of connects to the faucet. The threads of the nut at the end of the faucet supply line are meant to attach to a 38 male compression fitting as is found on the vast majority of supply valve outlets used today in the US. This is a Kohler faucet so the universal hoses do not fit.
Most stems are made way to long to make up for differant thicknesses of the tops. Then the guy down the street will find out that it is still 12 too short for him and if Kohler tried to accomodate every misinstalled water line because someone did not read the rough-in sheet correctly eventually they would have 30 tubes on the faucet and someone would complain. A line that is too long is not that big of an issue.
This Faucet Water Supply Line Too Short graphic has 20 dominated colors which include Tin Silver Uniform Grey Snowflake Steel Sunny Pavement Pig Iron Kettleman Black Cat Thamar Black Honeydew White Black Vapour Benthic Black Orange Com Dwarf Fortress Citrus Yellow Bleached Bone Foundation. We have replaced our cultured marble sink w a laminate countertop and a vessel sink -- the 20 supply lines provided w the faucet are about 4 too short. If the shanks are too short you may be able to thread the supply lines onto the end of shanks but you wont be able to screw them down far enough to get a snug watertight fit.
The extra hoses that connect the faucet diverter to the sprayer or if the faucet is a widespread model to the handles are also usually 12 inch in diameter but they have proprietary quick-connect fittings that vary by manufacturer. Flex line is a braided hose that is available in numerous lengths and connections used in sinks and tubs. If you determine the PEX supply tubing for this faucet is too long and must be shorter to create an acceptable installation be sure to read the instructions and plan ahead.
Plumbing for a faucet combines hard pipe with flexible pipe. The fitting was completely different than the fitting of my previous faucet which meant that they would not connect. Without at least a picture its hard to say why its not working.
After you attach a faucet to the sink you can attach the water supply lines that will eventually be connected to the shut-off valves on the main water supply pipes. E-plumber NY You can purchase a faucet supply extension. Faucet water line wont reach.
Take the faucet to any box store to see what size lines will connect to what you have. New Sink Faucet - water supply lines too short. But the problem will likely reveal itself when you try to install the water supply lines to the ends of the faucet shanks.
Also if there isnt an extender are there tricks. I tried to purchase a new hose from a local Kohler dealer but I was told they only come in one length 22 inches and I need one that is at least 24 inches.