Lock washers or self locking nuts would work. 1990 Chevrolet K1500 57L oe.
Https Www Westinautomotive Com Images Epim Original 75 1109 Pdf
11-13-06 1033 AM - Post 1032983 In response to chevynut I dont think the bolt stress is the limiting factor.
Silverado body mount bolt torque. I dont have a torque wrench at the moment but that will change with a trip to HF. Lbs Brake Caliper Mounting Bolt Rear 15 series 42 Nm 31 ft. Tighten body mount bolt to factory torque specifications for your particular model year.
4 OVAL SIDEBARS BODY BOLT MOUNT 1999-2018 SILVERADOSIERRA 15-3500 EXTENDED DOUBLE CAB Excl. What are the torque spec for the engine mount bolts to block pulley bolts at harmonic balancer and waterpump bolts. Direction and continue to unscrew until the body mount bolt is out.
LbsCaliper Mounting Bracket to Knuckle Front 15 series 175 Nm 129 ft. What are the torque specs for body mounts. The recommended torque values for each fastener type are as follows.
I didnt use any locktite I did the opposite I used anti-sieze on the threads. 11788 Air Hill Road Brookville Ohio 45309 p. Thanks for all the specs I see there is a spec for assit steps but I dont think they mean the body bolts with assit Looks like I want Body Mounting Bolt 70 Y 52 lb ft.
Align the step bar as desired. Search Car Torque Specifications by Engine or Model. When you remove the body cushions do NOT separate the frame from the body more than is necessary.
Tighten body mount bolt to factory torque specifications for your particular model year. Lbs Brake Caliper Mounting Bolt Rear 25. Covina Blvd Customer Service 800 793.
Insert the factory body mount bolt through the Mounting Bracket factory washer if equipped and up into the mount. Read more Randall C. Yes I put on my nerf bars that mount to the 3 body mounts on each side and could not remember what the torque is and could not find it.
Lbs Caliper Mounting Bracket to Knuckle Front 2535 series 300 Nm 221 ft. Example of GM factory body mount bolt. Engine Mount Through Bolt to Frame 55 lb ft 75 Nm Engine Mount to Block Bolts 43 lb ft 58 Nm Engine Mount to Frame Bolt 48 lb ft 65 Nm.
Snug but do not fully tighten the body bolt at this time. Body mount Bolts after removing nerf bars. Example of GM factory body mount bolt.
GM 57L-350ci-V8 Engine Torque Specs. Pull slightly on the cable from the mounting area in order to provide slack for body movement without binding the cable. Example of GM factory body mount bolt.
Jan 02 2018 823pm. Chevy Truck Forum Silverado Sierra GMC Truck Forums. Repeat this process as necessary on all GM body mount bolts.
Select the driver side front Mounting Bracket Figure 2A. Lbs Brake Caliper Mounting Bolt Rear 15 series 42 Nm 31 ft. Need the correct torque specs for 2004 silverado 1500 calipers Tighten the 2 brake caliper mounting bolts to 108 Nm 80 ft.
Need the correct torque specs for 2004 silverado 1500 calipers Tighten the 2 brake caliper mounting bolts to 108 Nm 80 ft. Lbs Brake Caliper Mounting Bolt Rear 25. Lbs Caliper Mounting Bracket to Knuckle Front 2535 series 300 Nm 221 ft.
Body mount Bolts after removing nerf bars. Over 6000 Automotive Torque Specs. Engine is now 383 stroker huge engine mods.
Remove the body mount bolts. Remove the front body mount bolt Figure 1. 2008 Chevy Silverado 3500hd diesel 66 need torque spec for 4 bolts holding front right hub assembly and the axle to hub torque and the axle to diff and the caliper mounting bracket.
Torque Converter Bolt 44 lb ft 60 Nm Transmission Oil Cooler Clip Nut 80 lb in 9 Nm Turbocharger Bolt 80 lb ft 108 Nm. Properly support the body in the area that the mounts will be replaced. LbsCaliper Mounting Bracket to Knuckle Front 15 series 175 Nm 129 ft.
Once everything compresses to where the sleeve bottoms out you dont want to torque much more than snug as it may distort the flat washers. Like the others have said not specific value that I know of for those bolts. Dec 29 2017 821pm.
I found a Prothane body mount bushing kit part number 7141 for about 10000. M14 body mount bolts to 95 ft-lbs 12 fasteners to 65 ft-lbs and the M10 fasteners to 30 ft-lbs. CK Classic Page 2 of 5 42914 DP INSTALLATION INSTRUCTIONS.
Next remove Nerf Bars Remove body mount bolts on one side of the truck there are three on each side of the cab along the outside of the frame with impact gun and a 21MM socket I found some pretty bad rust under mine. With a grade 8 716 bolt 60-65 lbft max. Start installation on the front driver side of the vehicle.
Use of an appropriate anti-seize compound is highly recommended for re-installation. I would use the size and grade of the bolt as a reference for max torque. The slots in the mounting brackets allow in out adjustment.
Tighten body mount bolt to factory torque specifications for your particular model year. 1999-2013 Chevrolet Silverado GMC Sierra 1500 Extended Cab 2001-2014 Chevrolet Silverado GMC Sierra 25003500 HD PART NUMBER.