I had an issue with a messed up lock cylinder so I replaced it with a new one. Lastly the lock can fail to release your key or not allow the key to travel all the way into the ignition lock cylinder.
When I Turn My Ignition Switch To On Position Car Starter Will Not Engage And Theres No Dash Lights When I Switch It
Power the Accessories- This should be what you get when you turn the key to the first position.
Pontiac sunfire ignition lock cylinder problems. 1995 to 2001 Cavalier Pontiac Sunfire ignition lock cylinders are the same. Ignition Lock Cylinder The Sunfires ignition lock cylinder itself can go bad over time. As the ignition lock cylinder is repeatedly turned every time the vehicle is started it will eventually begin to wear out.
While it would seem like the most likely cause for a key to get stuck in the ignition at first compared to it being a bad key this is not nearly as likely. How Your Sunfires Ignition Switch Works. Pontiac Sunfire SE i have a 2000 pontiac sunfire the ignition i have a 2000 pontiac sunfire the ignition lock cylinder went bad so i replace it with one from another 2000 sunfireafter going through the issue of the car not starting and having to take it to the.
1998 Sunfire PassLock problem 2 Answers. The new one is out of an 2004 bought on eBay. So I just found this out today.
My son had the problem on his. One of the first symptoms of a potential ignition lock cylinder is issues powering the vehicle on. A worn ignition cylinder may not function correctly when the key is inserted.
And while im sure this isnt the preferred way to do it - I was able to open up the cylinder and noticed a long metal bar with about 8 springs underneath it. Maintenance Repair My husband had the wrong key tried to jam it in the ignition messed it upnow the key for the key wont go inhe messed up the key slot. Old one would turn at all.
Well unfortunately there is a problem with the theft system it could be the new lock cylinder might be faulty or the Body Control Module it should have a trouble code in memory. The theft system cannot be disable. And workedthe end to a long storyhad to drill out iggnition lock cylinder on 2003 pontiac sunfirewhen new lock cylinder was installed car would not startthanks a million.
The ignition switch typically sits directly behind the lock cylinder. 1997 pontiac sunfire key wont turn in ignition You will have to have the ignition cylinder replaced in the car. I have a 2000 pontiac sunfire the ignition lock cylinder went bad so i replace it with one from another 2000 sunfireafter going through the issue of the car not starting and having to take it to the dealership after the radio locking the dealership reprogrammed the new igntion to the car the theft system light is still on along with the service light the airbag light the car runs but the gm.
Be advised that your car has an anti theft system. The Sunfires ignition switch is not what your key goes into. And workedthe end to a long storyhad to drill out iggnition lock cylinder on 2003 pontiac sunfirewhen new lock cylinder was installed car would not startthanks a million.
The car will start up then stall out the securit. My son had the problem on his. Your Pontiac Ignition Lock Cylinder is attached to the steering column and includes tumblers that work with a key so as to fire up the car.
Replaced ignition lock on 2002 pontiac sunfire antitheft light is lite car will crank but not start. If you plan on installing a used cylinder from another car you will need to have the replacement cylinder coded to your original key OR have a key with the same resistor value as your original key cut for the replacement cylinder new or used Without doing this. 97 Sunfire Update So I was able to remove the housing around the steering column and depress the pin underneath the cylinder so I could remove the ignition lock cylinder entirely.
Or its possible the ignition will turn and run with the key removed or lets the key be removed in any position. Now the car starts but only for a second or two. But the computer does not seem to be trying to learn the new PassLock.
Was this designed to work like this. It has three main functions. That is called the lock cylinder.
When the ignition switch lock cylinder fails it can create a situation where the ignition cannot be turned or takes much wiggling and shaking before it finally turns. The ignition has been rigged so the key can come out. I thought it might be the ignition cylinder but even with a new one installed the problem persists.
Partsgeek offers replacements for the Grand Am Sunfire Grand Prix Bonneville Aztek Firebird plus more. The only thing that keeps that ignition from turning is a little tang on the sdie of it. Even while in Park the ignition will not turn to the off locked position.
Ok i just bought a 1999 Sunfire that wont turn off. Replaced ignition lock on 2002 pontiac sunfire antitheft light is lite car will crank but not start. Aug 09 2017 at 0519 PM about the 1997 Pontiac Sunfire 2 Dr GT Coupe Question type.
If the old lock cylinder was working before you can install the old lock cylinder. I had to do some cutting and soldering because the new one had a shorter cable. Anti-theft light on the dash flashes.
I had to put a new ignition lock cylinder in my car.